Bring the luxury feeling of underfloor heating and the simplicity of an electric system to timber and carpet floors.
Thermofoil PRO is the most advanced electric under floor heating foil available today. Innovations such as our exposed cable loops and continuous earth protection ensure an easy installation and total safety.
| Width | 500mm |
| Thickness | 2.5mm |
| Max. Temperature* | 28°C * |
| Protection Rating | IPX7 |
| Warranty | Lifetime |
| Wattage | 140W/m2 |
| Conductor Type | Single Ended |
| Cold Tail Length | 5m |
Â
*Regulated by floor sensing thermostat
**Based on installing the cable at two dimple spacing
We are so confident in the quality of Thermonet Underfloor Heating cable that we provide a lifetime warranty on each system, as well as a three-year warranty on our thermostats.
Thermofoil PRO's second layer of foil is meant to shield the heating element while also distributing heat evenly to the floor above.
Thermogroup's product developments include the accessible cable loops. They allow for quick and easy cut-and-return installation while also preserving the heating element.
Thermofoil PRO's continuous earth braid protection runs the length of the heating cable, ensuring electrical safety. It can also be used in the bathroom.
The foil system is only 2.5mm thick, with a 4mm thick low-profile cold tail that may be hidden under the insulation.
| Stock No. | Size | Area | Output | Resis.Ω | Stock Status | Action |
|---|---|---|---|---|---|---|
| 111502 | 2 x 0.5m | 1m2 | 150 W | 353 Ω | In Stock | |
| 111503 | 3 x 0.5m | 1.5m2 | 225 W | 235 Ω | In Stock | |
| 111504 | 4 x 0.5m | 2m2 | 300 W | 176 Ω | In Stock | |
| 111505 | 5 x 0.5m | 2.5m2 | 375 W | 141 Ω | In Stock | |
| 111506 | 6 x 0.5m | 3m2 | 450 W | 118 Ω | In Stock | |
| 111507 | 7 x 0.5m | 3.5m2 | 525 W | 101 Ω | In Stock | |
| 111508 | 8 x 0.5m | 4m2 | 600 W | 88 Ω | In Stock | |
| 111509 | 9 x 0.5m | 4.5m2 | 675 W | 78 Ω | In Stock | |
| 111510 | 10 x 0.5m | 5m2 | 750 W | 71 Ω | In Stock | |
| 111512 | 12 x 0.5m | 6m2 | 900 W | 59 Ω | In Stock | |
| 111514 | 14 x 0.5m | 7m2 | 1050 W | 50 Ω | In Stock | |
| 111516 | 16 x 0.5m | 8m2 | 1200 W | 44 Ω | In Stock | |
| 111518 | 18 x 0.5m | 9m2 | 1350 W | 39 Ω | In Stock | |
| 111520 | 20 x 0.5m | 10m2 | 1500 W | 35 Ω | In Stock | |
| 111524 | 24 x 0.5m | 12m2 | 1800 W | 29 Ω | In Stock | |
| 111528 | 28 x 0.5m | 14m2 | 2100 W | 25 Ω | In Stock | |
| 111532 | 32 x 0.5m | 16m2 | 2400 W | 22 Ω | In Stock |
Also available in kits including a Thermostat
Because heat flows evenly in all directions until it encounters a layer of thermal resistance, installing a layer of Econoboard Insulation Boards beneath the Underfloor Heating to act as a thermal resistance layer and prevent downward heat loss is highly recommended. Stopping this downward heat loss reduces the time it takes for the Underfloor Heating to heat up and can improve its efficiency by up to 50%. However, if this is not taken into account during the height construction, the heating will still work, but it will be less efficient and take longer to warm up.
Uncoated boards have an extruded polystyrene core with a fibre reinforced cement coating on both sides, whereas coated boards have an extruded polystyrene core with a fibre reinforced cement coating on both sides. The Coated Econoboard is designed to be used on a wooden substrate to offer lateral stability, whilst the Uncoated Econoboard is designed to be used on concrete.
Your Information is safe and will never be shared
