- Thermotouch 4.3dC Dual Control Programmable Thermostat
Thermotouch 4.3dC is a dual thermostat that can control your underfloor heating and electric towel rail or mirror demister.
Thermotouch has been redesigned to deliver an easy to use electric underfloor heating thermostat that has all the functionality required yet is simple to operate.
Technical Data
| Size | 129x88x48mm (31mm in wall) |
| Protection Rating | IP30 |
| Max Load | Underfloor Heating Relay: 16A Appliance Relay: 5A |
| Orientation | Portait or Landscape |
| Colour | 5245: Ice White 5246: Satin Black |
| Temperature Range | 5 – 35C |
| Warranty | 3yrs |
| Compatible Sensors | 6.8kΩ, 10kΩ, 12kΩ, 15kΩ, 33kΩ (@ 25°C) |
Â
*Regulated by floor sensing thermostat
**Based on installing the cable at two dimple spacing
Dual Relay Controls
Thermotouch 4.3dC has two independent relays, allowing you to set separate on/off heating schedules for your underfloor heating and towel rail.
Economical Heating Schedule
Set up an on-demand heating schedule for your underfloor heating and an optional supplementary appliance to save electricity.
Smart Boost Settings
With a simple touch of the screen, you can override your heating schedule for up to 4 hours. After then, Thermotouch will return to your heating schedule.
Multiple Sensor Compatibility
Thermotouch 4.3dC is compatible with the most common floor sensor probes on the market, making it an excellent choice for replacing your old thermostat.
Smart Adaptive Start
Thermotouch learns how long it takes for your floor to warm up and guarantees that your room is warm when you want it to be.
Also available in kits including a Thermostat
Frequently Asked Questions
Although each circumstance is unique, it is recommended that you start by setting your underfloor heating to 24°C. Increase or lower the temperature after several days of testing to discover your comfort temperature. Please keep in mind that a 1°C drop in temperature may not have a significant impact on the comfort or warmth of the floor, but it can help to save operating expenses.
The length of time depends on your lifestyle, the system you’re using, and the temperature you want to achieve.
A floor sensor is a small probe that is placed beneath the floor, in the space between two lengths of heating cable. This is connected to the thermostat and provides a precise temperature readout of the floor.
Yes! Thermogroup’s Underfloor Heating Thermostats include a Floor Sensor as well as a 20mm flexible conduit to install the sensor in, making it easier to repair if necessary. The Floor Sensor and Conduit are located beneath the unit in your Thermostat box.
The installation of a conduit for the floor sensor is recommended so that if a floor sensor fails or the thermostat is upgraded, the floor sensor can be replaced without causing damage to the floor covering. If this is not possible, a second-floor sensor should be installed as a backup.
Yes, our Thermotouch 4.3dC dual control thermostat allows you to manage your underfloor heating and towel rail separately from a single controller.
No, you’ll need an unique controller for each zone you want to have individual control over.
Yes, make sure your underfloor heating comes with a manual controller that can be connected to and controlled by your C-Bus system.
The electrician will need to connect mains electricity to the thermostat site before roughing in for our underfloor heating and controller. The electrician will next run two 20mm conduits from the thermostat position to the floor, one for the Underfloor Heating Cold Tail and the other for the Floor Sensor. Please see our Conduit Requirements pdf for more information and a graphic representation.
Get our best price on the:
Your Information is safe and will never be shared
Services
Electrical
Underfloor Heating
Level 2
Security
Solar
Lighting
Other
